National and Global Distributor of Premium Medical Products

DynaCore 9400 Series Seating System

More Views

DynaCore 9400 Series Seating System
$1,450.00

Availability: In stock

 Medical Seating



  • Model: 9400B-BD

  • Lead Time: 7-10 Business Days

  • Manufactured by: Brewer Company

$1,450.00
Description

Details

DynaCore 9400 Series Seating System

Product Benefits

  • Dynamic, Core Strengthening Operator Series
    • Provides 360 degrees of seat movement that improves natural posture and balance
    • Increases back and core muscles strength through progressive resistance exercise
    • Seat movement can be easily adjusted to your own preference and comfort level
  • Enhances Sensory Benefits
    • Core muscle movement stimulates increased sensory feedback to the brain which:
      • Aids in the prevention and reduction of lower back pain
      • Promotes postural health and endurance
      • Heightens ability to concentrate and be more productive
Details

Details

Special Shipping Services: The following services are available for an additional fee – please contact Brewer Customer Service at the number below for details:

Lift Gate: For deliveries without a loading dock; please note that this does not include inside delivery.

Inside Delivery: Product is transported from truck to just inside front door of building; please note that this does not include lift gate.

Setup and Debris Removal: Product is removed from skid, placed for use, packaging materials and skid are removed.

Expedited or Guaranteed Shipping: Fast and/or guaranteed arrival for shipments. 

Warranty: Brewer shall manufacture the Products in accordance with the requirements of all applicable law, including without limitations, the regulations promulgated by and for the Federal Food and Drug Administration and industry standards. Brewer warrants its Products to be free from defects in parts and workmanship under normal use and service for a period detailed in the table below from the date of delivery to original end user. Brewer will not be responsible for any Product failure due to abuse, modification or improper use, or for any use which exceeds the published capacity of the Product.

Do not discard parts before contacting Brewer for warranty service, as Brewer may require the customer to send in defective parts for examination to determine the applicability of these warranty provisions. If this occurs, the customer will be invoiced against a new purchase order for the replacement part. If the part is found to our satisfaction to have been defective under the terms of the warranty, the customer will be credited the amount of the replacement part and outbound shipping costs. If the part is found not to be defective under the terms of this warranty, the customer is liable for the cost of the replacement part, shipping, and/or any repair costs.

This warranty is exclusive and in lieu of all other warranties and remedies whatsoever, including but not limited to implied warranties for merchantability and/or fitness for a particular purpose. No agent, employee, or representative of Brewer has any authority to make any affirmation, representation, or warranty not set forth in these terms and conditions concerning any products of Brewer. Brewer shall have no liability whatsoever for damages caused by transportation, accidents, fire, unauthorized alteration, or normal wear or abuse. Brewer will have no liability whatsoever for any incidental or consequential damages, including without limitation, lost profits or any such damages arising from (a) the design, manufacture, sale, delivery, installation, repair, operation or use of Products of Brewer or any part thereof, (b) any actual or alleged failure or defect in Products of Brewer or any part thereof, or (c) any actual or alleged breach or non-performance by Brewer of this limited warranty.

Obtaining Warranty Service: Warranty service must be obtained through The Brewer Company by contacting Customer Service by phone at 1.888.Brewer1 (1.888.273.9371), by fax at 1.262.251.1786, or by e-mail at customerservice@brewercompany.com. If the product is within the warranty period described above, Brewer will either provide on-site repair services, ship replacement parts or replace the product at the discretion of The Brewer Company. On-site service is provided only within the Continental United States, and only replacement parts or product will be provided at Brewer’s discretion in Canada. A product warranty registration must be completed for exam tables and LiftMates and submitted to Brewer within 30 days after purchase in order to receive warranty benefits. Warranty cards are included in the purchase of all exam tables and LiftMates and are also available online at www.brewercompany.com.

Return Policy

Return Policy

Return Goods Policy:   Products must not be returned without proper written or verbal authorization from Brewer in the form of a Return Material Authorization (RMA). Requests for RMA must be made prior to return of product. All requests for authorization must include: (1) the reason for requested return, (2) the original purchase order number, (3) Brewer item number, and (4) the quantities of product to be returned.

Non-warranty product returns must be made PREPAID to Brewer, must be without damage, and must have the original Brewer packaging intact. The RMA number should be referenced on the outside of the packaging for all returns. Returns must be received within 60 days of issuing the RMA, and support products must be returned within 60 days of receipt by the original end user. Unauthorized returns, returns not referencing Brewer’s RMA number and potentially hazardous returns will be refused, are subject to an additional $25.00 fee, and will either be scrapped or returned to the customer at their expense.

Authorized returns will be eligible for credit per the following schedule: 

Return Policy

Allowable Credit

Valid Warranty claims, including error in processing by Brewer

100%

Medical division seating & tables in standard colors (subject to 25% restocking fee*)

75%

Unused Medical division products less than six (6) months old (subject to 25% restocking fee*)

75%

Custom-made upholstered products

Non-returnable

Medical division non-standard colors

Non-returnable

Service parts sold for less than $50.00 and all replacement upholstery

Non-returnable

Non-warranty products returned after six (6) months from date of shipment.

Non-returnable

Non-warranty products returned unsuitable for resale because used, soiled, damaged, discontinued, etc.

Non-returnable

 

*The standard restocking fee is 25% with a $50.00 minimum, whichever amount is greater, not to exceed the price of the product.