Invasive procedures, such as angiography, carry risks. Hence, all areas concerning the procedures are given detailed attention to ensure the safety of the patients. This includes special care in the selection of seemingly unimportant medical supplies such as angiographic syringes.
What are angiographic syringes? These are high-pressure syringes used to deliver contrast agents in various procedures like angiogram, MRI and CT scan. The success of the procedure is also dependent on them hence it would be invaluable to check for these three things when buying them.
- They should be free from air bubble at all times. Recent studies have revealed that complications arising from air embolism, as caused by introduction of air bubbles into the patient during the procedure, are rising. This unfortunate event can be prevented or totally eliminated through the alertness of the medical practitioner and use of quality angiographic syringes, with features such as the following:
- The material is clarified polypropylene. This is for the medical professionals to easily see the content of the syringe.
- It is dual-seal for prevention of air aspiration and leakage.
- It has tapered luer tip if ever there is a need to remove a bubble.
- Extra long “J” shaped fill tube.
- Extra-long protective cap for prevention of contamination.
- They should be user-friendly. One way of ensuring a successful angiography is the ease of use of medical supplies. Let’s take for example the use of angiographic syringes. As the container of the contrast agent, these syringes play a big role in the procedure. To illustrate it more properly, here is a brief description of the angiography procedure.
Angiography is a very delicate procedure, which can take 30 minutes up to 2 hours to complete, depending on the complexity of the case. Although it is usually done as an outpatient case, there will be times that an overnight stay in the hospital would be required. Local anesthesia is used unless the patient is a young child or infant, then general anesthesia is preferred. Only skilled medical specialists can perform the procedure.
As an added precaution, an IV line, a cardiac monitor and a blood pressure monitor would be placed on the patient prior to the actual procedure. To start angiography, a sheath (a small plastic tube) will be inserted on the patient’s artery. Through the sheath, a long, thin, flexible tube called a catheter, would be inserted. Then the contrast agent is injected into the catheter where it would go to the arteries being investigated.
Let’s stop here for a while. As mentioned, these high-pressure syringes are the container of the contrast agent. Therefore, there should be no error, as much as possible, during its injection. What physical qualities should these syringes possess for this to happen? Here are some answers:
- They should fit the hand of the medical practitioner properly. Some syringes are created with slip-free body to avoid dropping the syringe while holding it.
- Pulling and pushing of the content in the syringe should be effortless.
- The visibility of the content is of utmost importance, as air bubbles can be fatal to the patient. Hence, a transparent syringe, free from any unnecessary marks, is vital to the procedure.
Going back to the procedure, a series of X-rays would be taken after the contrast agent has been injected. After wards, the catheter would be removed and the incision site would be closed, either with manual pressure, clamp or plug, to prevent bleeding.
- The price should be right. This is where the generic power injector angiographic syringes of Kemper Medical come in. The company boasts of value for money for these supplies. For the same qualities as the other brands, one can have syringes for CT, MRI or angio/cardio procedures at a lower price. As a result, the cost of exams for angiography, CT scan, MRI and other procedures requiring the use of such syringes is also being reduced.
Some companies charge high-pressure syringes for as high as $600 per pack. At Kemper Medical, one can purchase virtually the same products at half the price and sometimes, even lower than that. Aside from this, the said company can be relied to deliver on time, whether in local or international destinations.
Not all angiographic syringes are created equal. The Kemper Medical generic power injector syringes are proof of this. They are designed to be safe for the patient, easy-to-use for the practitioner and easy on the pocket for both parties.