Bar-Ray Reverse Vest X-ray Apron – Male

Bar-Ray Reverse Vest X-ray Apron – Male 

Here’s a vest that evenly transfers its weight from the shoulders to the waist area. Similar to our Vari-Flex X-ray apron, the Reverse Vest attaches to the body with Velcro shoulder and waist straps; shrug your shoulders prior to attaching for a custom fit. Pair this vest with a Kilt for full 360 coverage.  Shoulder pads offer additional comfort.

0.50MM PROTECTION
Vest — 0.25mm each front flap (0.50mm at overlap), 0.25mm back
Reverse Vest — 0.50mm front, 0.25mm each rear flap (0.50mm at overlap)

0.40MM PROTECTION
Vest — 0.20mm each front flap (0.40mm at overlap), 0.20mm back
Reverse Vest —0.40mm front, 0.20mm each rear flap (0.40mm at overlap)

Please note: all radiation protection aprons are custom made-to-order and are non-returnable.

VEST SIZING CHART MALE

Product Enquiry

PRESTIGE is even lighter than Starlite and is lead-free. Prestige is also available in an ‘Ultra’ version which is .35mm protection that attenuates 97% at 100 KVP. ‘Ultra’ is nominally 30% lighter than .50mm.

STARLITE it contains no lead yet provides the same attenuation properties as Cost Cruncher and True Lite. Starlite is 12% lighter than True Lite.Starlite is the protection you want when working long procedures, since most .50mm equivalent Starlite front protection aprons weigh approximately 10 lbs or less – that’s a big weight off your shoulders! Like our other protective products, Starlite is available in the ‘Ultra’ version making the apron even lighter – imagine a front protection apron that weighs approximately 7 pounds and still gets an attenuation rating of 97% at 100 KVP.

TRUE LITE was our introduction to lightweight lead protection. True Lite is 10% lighter than Cost Cruncher and offers the same attenuation properties. Bar-Ray introduced True Lite over 10 years ago and it is still the leader in lightweight lead protection. True Lite is also available in the ‘Ultra’ version of .35mm protection which makes an approximately 30% lighter apron while still providing 97% attenuation at 100 KVP.

COST CRUNCHER is our traditional weight lead protective material. It provides .50mm protection and attenuates 100% at 100 KVP. It is the most economical choice for the technician that does not need to wear the apron for long periods of time. Cost Cruncher is also available in an ‘Ultra’version which is .35mm protection that attenuates 97% at 100 KVP. ‘Ultra’ is nominally 30% lighter than .50mm.

Return Policy

All aprons are custom made to your specifications, therefore, are not returnable.  For alterations or adjustments, please contact Kemper Medical for a Return Authorization Number. Returns to Bar-Ray without prior authorization will not be accepted.

USE & CARE INSTRUCTIONS FOR PROTECTIVE APPAREL

Thank you for choosing Bar-Ray for your new protective apparel. To ensure the longevity of your new garment, please follow these simple guidelines:

Upon receipt of your garment, the Quality Control Officer should radiograph it to ensure that no damage occurred during shipping.

When not in use your garment should be stored properly.

Remove stains immediately when they occur. If this is not possible, clean with warm water and a non-bleach dishwashing soap. Do not use harsh or abrasive cleansers. Some upholstery cleaners that remove protein stains may be used to clean blood.

DO’S

• radiograph the apron on a regular basis.
• clean it regularly.
• store it properly.

DON’T’S

• sit in/on your apron.
• expose it to extreme temperatures.
• lean against sharp edges or pointed objects.
• store the apron over the back of a chair
• fold your apron

WARRANTY One (1) year from date of shipment.

DISPOSAL

When ordering a new Bar-Ray protective apron, we offer disposal of your old Bar-Ray aprons on a one-for-one basis. Simply remove the outer cover, keeping the manufacturing tags intact, and return prepaid to the address shown below.

QUESTIONS

Please contact us at Kemper Medical if you have any questions (541-508-0540).