Bar-Ray Standard Skirt/Kilt X-ray Apron with Suspenders – Unisex
Durable suspenders attached to the skirt extend upward from the waist, over the shoulders and crisscross the back to keep the skirt in place during use. A 2-inch buckle closure at the waist area keeps the skirt secure on the body during procedures. The wide comfortable suspenders will provide that extra support so you don’t have to hitch up your skirt or fasten it so tight it becomes uncomfortable.
This skirt is available with 0.50mm and 0.40mm radiation protection in a single unisex form (see below).
Skirt — 0.25mm each front flap (0.50mm at overlap), 0.25mm back
Skirt — 0.20mm each front flap (0.40mm at overlap), 0.20mm back
SKIRT SIZING CHART UNISEX
|Size Name||Waist Size||Hip Size||Length|
|x-small||26″ – 27″||33″ – 34″||19″|
|small||28″ – 29″||35″ – 36″||19″|
|medium||30″ – 31″||37″ – 38″||20″|
|M2||32″ – 33″||39″ – 40″||20″|
|large||34″ – 35″||41″ – 42″||21″|
|L2||36″ – 37″||43″ – 44″||21″|
|x-large||38″ – 39″||45″ – 46″||22″|
|2X||40″ – 41″||47″ – 48″||22″|
Optional Aerated Apron℠ Upgrade
The Aerated Apron℠ Upgrade’s high-tech design uses an airspace vented liner for optimum cooling comfort. Most aprons trap in body heat, but the Aerated Apron℠ Upgrade allows cool air to circulate through the apron while hot air escapes through built in shoulder vents.
Optional Comfy Collar℠ Upgrade
Breathable and sweat resistant, the Comfy Collar℠ Upgrade’s soft, vented liner allows air to flow through the fabric. You work hard. You might as well be comfortable.