MSRP $290.00Our Price $210.00
Kemper Medical Owners Note: Base price reflects .4mm lead.
Bar-Ray Standard Skirt/Kilt X-ray Apron
Our Standard Skirt/Kilt X-ray apron provides radiation protection to the lower body region. Nonslip material attached to the interior waistline of the garment prevents the skirt from shifting and sliding during use. A 2-inch buckle closure on the exterior front waist area secures the garment in place on the body. Pair the Kilt/Skirt with a Bar-Ray vest for the excellent radiation protection from shoulders to knees.
This skirt is available with 0.50mm and 0.40mm radiation protection in a single unisex form (see below).
Skirt — 0.25mm each front flap (0.50mm at overlap), 0.25mm back
Skirt — 0.20mm each front flap (0.40mm at overlap), 0.20mm back
SKIRT SIZING CHART UNISEX
|Size Name||Waist Size||Hip Size||Length|
|x-small||26″ – 27″||33″ – 34″||19″|
|small||28″ – 29″||35″ – 36″||19″|
|medium||30″ – 31″||37″ – 38″||20″|
|M2||32″ – 33″||39″ – 40″||20″|
|large||34″ – 35″||41″ – 42″||21″|
|L2||36″ – 37″||43″ – 44″||21″|
|x-large||38″ – 39″||45″ – 46″||22″|
|2X||40″ – 41″||47″ – 48″||22″|
Please note: all radiation protection aprons are custom made-to-order and are non-returnable.
Optional Aerated Apron℠ Upgrade
The Aerated Apron℠ Upgrade’s high-tech design uses an airspace vented liner for optimum cooling comfort. Most aprons trap in body heat, but the Aerated Apron℠ Upgrade allows cool air to circulate through the apron while hot air escapes through built in shoulder vents.
Optional Comfy Collar℠ Upgrade
Breathable and sweat resistant, the Comfy Collar℠ Upgrade’s soft, vented liner allows air to flow through the fabric. You work hard. You might as well be comfortable.
PRESTIGE is even lighter than Starlite and is lead-free. Prestige is also available in an ‘Ultra’ version which is .35mm protection that attenuates 97% at 100 KVP. ‘Ultra’ is nominally 30% lighter than .50mm.
STARLITE it contains no lead yet provides the same attenuation properties as Cost Cruncher and True Lite. Starlite is 12% lighter than True Lite.Starlite is the protection you want when working long procedures, since most .50mm equivalent Starlite front protection aprons weigh approximately 10 lbs or less – that’s a big weight off your shoulders! Like our other protective products, Starlite is available in the ‘Ultra’ version making the apron even lighter – imagine a front protection apron that weighs approximately 7 pounds and still gets an attenuation rating of 97% at 100 KVP.
TRUE LITE was our introduction to lightweight lead protection. True Lite is 10% lighter than Cost Cruncher and offers the same attenuation properties. Bar-Ray introduced True Lite over 10 years ago and it is still the leader in lightweight lead protection. True Lite is also available in the ‘Ultra’ version of .35mm protection which makes an approximately 30% lighter apron while still providing 97% attenuation at 100 KVP.
COST CRUNCHER is our traditional weight lead protective material. It provides .50mm protection and attenuates 100% at 100 KVP. It is the most economical choice for the technician that does not need to wear the apron for long periods of time. Cost Cruncher is also available in an ‘Ultra’version which is .35mm protection that attenuates 97% at 100 KVP. ‘Ultra’ is nominally 30% lighter than .50mm.