Product Description
Bar-Ray Wide Belt Vest X-ray Apron – Male
An adjustable 6-inch-wide elastic belt aids in transferring the weight of this vest from the shoulders to the waist area. Simply shrug your shoulders and adjust the belt for a comfortable, secure fit. Shoulder pads give comfort and support to the shoulders.
0.50MM PROTECTION — .50mm front, .25mm each rear flap (.50mm at overlap)
0.35MM PROTECTION — .35mm front, .175mm each rear flap (.35mm at overlap)
VEST SIZING CHART MALE
| Size Name |
Chest Size |
Length |
| x-small |
35″ – 36″ |
23.5″ |
| small |
37″ – 38″ |
24.5″ |
| medium |
39″ – 40″ |
25″ |
| large |
41″ – 42″ |
25.5″ |
| x-large |
43″ – 44″ |
26″ |
| 2X |
45″ – 46″ |
26.5″ |
Please note: all radiation protection aprons are custom made-to-order and are non-returnable.
Optional Aerated Apron℠ Upgrade
The Aerated Apron℠ Upgrade’s high-tech design uses an airspace vented liner for optimum cooling comfort. Most aprons trap in body heat, but the Aerated Apron℠ Upgrade allows cool air to circulate through the apron while hot air escapes through built in shoulder vents.
Optional Comfy Collar℠ Upgrade
Breathable and sweat resistant, the Comfy Collar℠ Upgrade’s soft, vented liner allows air to flow through the fabric. You work hard. You might as well be comfortable.
PRESTIGE is even lighter than Starlite and is lead-free. Prestige is also available in an ‘Ultra’ version which is .35mm protection that attenuates 97% at 100 KVP. ‘Ultra’ is nominally 30% lighter than .50mm.
STARLITE it contains no lead yet provides the same attenuation properties as Cost Cruncher and True Lite. Starlite is 12% lighter than True Lite.Starlite is the protection you want when working long procedures, since most .50mm equivalent Starlite front protection aprons weigh approximately 10 lbs or less – that’s a big weight off your shoulders! Like our other protective products, Starlite is available in the ‘Ultra’ version making the apron even lighter – imagine a front protection apron that weighs approximately 7 pounds and still gets an attenuation rating of 97% at 100 KVP.
TRUE LITE was our introduction to lightweight lead protection. True Lite is 10% lighter than Cost Cruncher and offers the same attenuation properties. Bar-Ray introduced True Lite over 10 years ago and it is still the leader in lightweight lead protection. True Lite is also available in the ‘Ultra’ version of .35mm protection which makes an approximately 30% lighter apron while still providing 97% attenuation at 100 KVP.
COST CRUNCHER is our traditional weight lead protective material. It provides .50mm protection and attenuates 100% at 100 KVP. It is the most economical choice for the technician that does not need to wear the apron for long periods of time. Cost Cruncher is also available in an ‘Ultra’version which is .35mm protection that attenuates 97% at 100 KVP. ‘Ultra’ is nominally 30% lighter than .50mm.
Return Policy
All aprons are custom made to your specifications, therefore, are not returnable. For alterations or adjustments, please contact Kemper Medical for a Return Authorization Number. Returns to Bar-Ray without prior authorization will not be accepted.
USE & CARE INSTRUCTIONS FOR PROTECTIVE APPAREL
Thank you for choosing Bar-Ray for your new protective apparel. To ensure the longevity of your new garment, please follow these simple guidelines:
Upon receipt of your garment, the Quality Control Officer should radiograph it to ensure that no damage occurred during shipping.
When not in use your garment should be stored properly.
Remove stains immediately when they occur. If this is not possible, clean with warm water and a non-bleach dishwashing soap. Do not use harsh or abrasive cleansers. Some upholstery cleaners that remove protein stains may be used to clean blood.
DO’S
- radiograph the apron on a regular basis.
- clean it regularly.
- store it properly.
DON’T’S
- sit in/on your apron.
- expose it to extreme temperatures.
- lean against sharp edges or pointed objects.
- store the apron over the back of a chair
- fold your apron
WARRANTY One (1) year from date of shipment.
DISPOSAL
When ordering a new Bar-Ray protective apron, we offer disposal of your old Bar-Ray aprons on a one-for-one basis. Simply remove the outer cover, keeping the manufacturing tags intact, and return prepaid to the address shown below.
QUESTIONS
Please contact us at Kemper Medical if you have any questions (541-508-0540).
